| TECHNICAL SPECIFICATIONS | 
																								
																								  | Uplink Interface | • 1 or 2x Fiber WAN(s) • 1000 Base-LX (SC connector) - Long Haul, Single Mode
 • 1000 Base-SX (SC connector) - Short Haul, Multi Mode
 • 2x FE (10/100) WANs or 1x GE (1000) WAN(Slave box)
 | 
																								
						                															| Cascade | • 6x GE (1000) Subtends to Slaves | 
																								
						                															| DSL 
 
 
 | • 24-port 50-pin RJ-21 champ connector • POTS
 • 24-port 50-pin RJ-21 champ connector
 | 
																								
						                															| Others 
 
 
 | • 1xRJ45 Console port • 1x FE (10/100) MGM for outband management(Master box)
 • 1x output alarm contact(Master box)
 | 
																								
						                															| ADSL/ADSL2+ Feature 
 | • Backward compatible to TUANSI T1.413, ITU-T G.992.1, (G.dmt)      Annex A,
																									ITU-T G.992.2, (G.lite) Annex A, ITU-T G.992.3 (ADSL2)      Annex A
																									ITU-T G.992.5 (ADSL2+) Annex A • Power management defined on G.992.3 and G.992.5
 • Upstream 3M Annex M and Long reach DSL for Annex L of G.992.3
 • Fast SRA (Fast Seamless Rate Adaptation)
 • SELT (Single Ended Line Testing) for ADSL
 • DELT (Dual End Loop Testing) for ADSL2
 • Dying gasp
 • G.hs(G.994.1)
 • Annex A
 • Annex B
 | 
																								
						                															| Alarm Status Surveillance 
 | • Automatic alarm and status report • LED indication for system status
 | 
																								
						                															| Encapsulation Mode 
 | • RFC 2684 MPoA LLC/VCMUX • PPPoA to PPPoE conversion
 | 
																								
						                															| ATM Feature 
 
 | • 8 PVCs per subscriber line • F5 End-to-end and segment to segment OAM loopback in 1.610
 • UNI 3.1/4.0 PVC
 • VPI(0~255),VCI(0~65535)
 • F5 End-to-end and segment to segment OAM loopback in 1.610
 • Provide incoimg and outgoing rate limit per PVC
 | 
																								
						                															| Bridge Feature 
 | • IEEE 802.1p CoS prioritization • IEEE 802.1Q VLAN support
 • IGMP Snooping and 256 multicast group
 • 802.1d STP
 • GARP/GVRP
 • MAC Filter and Classifier
 • 4,000 MAC addresses
 • Support ICMN request from EMS or management tool
 • DHCP Option 82
 • Port isolation
 • VPN pass-through
 • PPPoE packet forwarding
 • Link aggregation
 • Port mirror
 | 
																								
						                															| VLAN 
 | • Support IEEE 802.1Q VLAN Tagging, Port-based VLAN • Support 512 VLANs concurrently
 • VLAN ID mapping to PVC
 • GVRP
 | 
																								
						                															| Qos 
 | • Support IEEE 802.1p • 4-priority queues for multimedia application
 
 | 
																								
						                															| Multicast Feature 
 | • Support IGMP snooping on IGMPv1 and IGMP v2 membership • Up to 256 Multicast Groups and 256 copies for each Multicast       Group
 • Broadcast storm control
 | 
																								
						                															| Management | • TFTP firmware upgrade utility via EMS • Inband or Outband by single IP management
 • Telnet server for remote management
 • SNMP enabled for network management function
 • SNMP v1.0 & v2C
 • Console or Telnet CLI for configuration or status monitor
 | 
																								
						                															| Operating Environment | • Operating conditions: -10 to 65° C(14 to 149° F) • Non-Operating conditions:  -10 to 85 °C( 14 to 185 °F )
 • Relative Humidity:  10 to 90 %
 
 | 
																								
						                															| Regulatory Safety Compliance | EMC CE: EN550221-1 & EN50082- Safety EN60950
 Dimensions (w/d/h) 44x28x4.5 cm
 Weight 6kg
 Power Requirement 100-240V AC or -42V -56V DC
 Power Consumption 60 W typical
 |