TECHNICAL SPECIFICATIONS |
Uplink Interface |
• 1 or 2x Fiber WAN(s)
• 1000 Base-LX (SC connector) - Long Haul, Single Mode
• 1000 Base-SX (SC connector) - Short Haul, Multi Mode • 2x FE (10/100) WANs or 1x GE (1000) WAN(Slave box) |
Cascade |
• 6x GE (1000) Subtends to Slaves |
DSL
|
• 24-port 50-pin RJ-21 champ connector
• POTS
• 24-port 50-pin RJ-21 champ connector |
Others
|
• 1xRJ45 Console port
• 1x FE (10/100) MGM for outband management(Master box)
• 1x output alarm contact(Master box) |
ADSL/ADSL2+ Feature
|
• Backward compatible to TUANSI T1.413, ITU-T G.992.1, (G.dmt) Annex A,
ITU-T G.992.2, (G.lite) Annex A, ITU-T G.992.3 (ADSL2) Annex A
ITU-T G.992.5 (ADSL2+) Annex A
• Power management defined on G.992.3 and G.992.5 • Upstream 3M Annex M and Long reach DSL for Annex L of G.992.3 • Fast SRA (Fast Seamless Rate Adaptation) • SELT (Single Ended Line Testing) for ADSL • DELT (Dual End Loop Testing) for ADSL2 • Dying gasp
• G.hs(G.994.1)
• Annex A
• Annex B |
Alarm Status Surveillance
|
• Automatic alarm and status report
• LED indication for system status |
Encapsulation Mode
|
• RFC 2684 MPoA LLC/VCMUX
• PPPoA to PPPoE conversion |
ATM Feature |
• 8 PVCs per subscriber line
• F5 End-to-end and segment to segment OAM loopback in 1.610
• UNI 3.1/4.0 PVC
• VPI(0~255),VCI(0~65535)
• F5 End-to-end and segment to segment OAM loopback in 1.610
• Provide incoimg and outgoing rate limit per PVC |
Bridge Feature
|
• IEEE 802.1p CoS prioritization
• IEEE 802.1Q VLAN support
• IGMP Snooping and 256 multicast group
• 802.1d STP
• GARP/GVRP
• MAC Filter and Classifier
• 4,000 MAC addresses
• Support ICMN request from EMS or management tool
• DHCP Option 82
• Port isolation
• VPN pass-through
• PPPoE packet forwarding
• Link aggregation
• Port mirror |
VLAN
|
• Support IEEE 802.1Q VLAN Tagging, Port-based VLAN
• Support 512 VLANs concurrently
• VLAN ID mapping to PVC
• GVRP |
VoIP |
• 24 FXS port
• SIP/MGCP
• Codec G.711, 729A, 723.1, G.726
• VAD(Silence Suppression) & CNG
• G.168-2000 Echo Canceller, Jitter Buffer
• Packet Loss Concealment
• RFC 2833 Out of Band DTMF
• Gain/Attenuation Setting
• Modem Support Rate Up V.2(for G.711 only)
• Line Polarity Reversal Generation
• QoS for B.W Reservation
• Hunt Group
• Call Holding
• Call Forwarding
• Outbound Proxy
• NAT Traversal(STUN)(RFC 3489)
• Incoming Cal Barring
• T.38 Fax Relay
• Hot Line
• MLT
• Multi-register |
Qos
|
• Support IEEE 802.1p
• 4-priority queues for multimedia application
• Configurable priority mapping for PVC and IEEE802.1p
• Strict priority
• Probabilistic priority
• Customized priority |
Multicast Feature
|
• Support IGMP snooping on IGMPv1 and IGMP v2 membership
• Up to 256 Multicast Groups and 256 copies for each Multicast Group
• Broadcast storm control |
Management |
• TFTP firmware upgrade utility via EMS
• Inband or Outband by single IP management
• Telnet server for remote management
• SNMP v1.0 & v2C
• SNMP trap report to EMS or NMS
• SNMP MIB for RFC1213, Ethernet, RFC2662, RFC3440 and proprietary MIBs
• Console or Telnet CLI for configuration or status monitor |
Operating Environment |
• Operating conditions: -10 to 65°C(14 to 149° F)
• Non-Operating conditions: -10 to 85°C( 14 to 185 °F )
• Relative Humidity:10% to 95 %
• Storage Humidity:5% to 95 % |
Regulatory Safety Compliance |
EMC CE: EN550221 class A & EN300386 V1.3.2-
Safety EN60950-1
MTBF 55,000 hours
Dimensions (w/d/h) 44x28x4.5 cm
Weight 6kg
Power Requirement AC 90-260 VAC or -42V~-56V DC
Power Consumption 150 W MAX |